Carbon-Kevlar Tour 6-Plate Back
Protector $114.95
|
This
6-plate touring design provides a more upright riding stance
and are really popular with serious road riders who want to
ride with protection as well as occasion track day riders.
Carbon/Kev panels with an additional layer of kevlar provide
great spine protection.
Carbon fiber is
extremely strong and light, Kev is fabric-like and has
tremendous resistance to puncture and tearing, which is why
it's used for ballistic vests, etc. Carbon & Kev together
produce an awesome combination of strength and flexibility
providing an anti-penetration barrier in a very thin
cross-section. An extra layer of Kevlar is placed underneath
the composite, which is then mounted over the absorbent rubber
based foam carrier. This provides unbeatable protection in a
section just over 1/2" thick!
- Adjustable
shoulder straps
Generous
coverage over shoulder blades
Ventilated
Lining material stays fresh
5.5 inch wide
Carbon/Kev panels
4 inch Elastic
Velcro belt provides support
- Broad 21 inch
width & 22.5 inch long provides full coverage to lower
back
An
extra layer of Kev is placed underneath the composite which is
then mounted over the absorbent rubber based foam
carrier
|
Carbon-Kevlar Aerostitch 6-Plate Back
Protector $124.95
|
6-Plate
Touring Design - Following hundreds of requests from safety
minded riders with what's regarded by many as the safest suit,
we now have available a version of the Carbon/Kev Back
Protector to install straight into a 'stitch' suit. It fixes
straight into the Velcro mounting points, and also has the
benefit of some kidney belt support. So you can put on your
protector at the same time as your suit! Easily adaptable to
other riding suits by fixing Velcro in the lining. The
measurements for the Back Protector velcro are (from the
center of the velcro) 21 inches high going from top to bottom
and 10 inches wide going from left to right. The velcro is
wide, and does allow for a little play in attaching the Back
Protector. This Back Protector is recommended for riders 6
foot and under.
- Adjustable
shoulder straps
Generous
coverage over shoulder blades
Ventilated
Lining material stays fresh
5.5 inch wide
Carbon/Kev panels
4 inch Elastic
Velcro belt provides support
Broad 21 inch
width provides full coverage to lower back
Provides
unbeatable protection in a section just over 1/2 inch
thick!
- An extra layer
of Kev is placed underneath the composite which is then
mounted over the absorbent rubber based foam
carrier
Velcro
attachments are provided in your `Stitch Jacket or Suit. Check
the size on the neck label and select from the chart. We have
designed it so that the average size rider has a choice of the
6 plate or the longer 7 plate protectors depending upon type
of bike ridden.
|
Carbon-Kevlar Tour 6-Plate Mini Back
Protector $114.95
|
Mini
Carbon/Kev Tour Back Protector (6 plates) The KC16M 6
Plate Mini is ideal for children and small women. Only half
inch thick, they easily fit under your jacket or suit.
Available in both profiles (with tailbone protection),
and Touring (for a more upright riding stance) in 6 and 7
plate, these are really popular with serious road riders who
want to ride with protection as well as occasion track day
riders. Carbon/Kev panels with an additional layer of kev
provide great spine protection. This provides unbeatable
protection in a section just over 1/2" thick!
- Adjustable
shoulder straps
Generous
coverage over shoulder blades
Ventilated
Lining material stays fresh
5.5 inch wide
Carbon/Kev panels
4 inch Elastic
Velcro belt provides support
Broad 21 inch
width & 22.5 inch long provides full coverage to lower
back
- An extra layer
of Kev is placed underneath the composite which is then
mounted over the absorbent rubber based foam
carrier
|
Carbon-Kevlar Tour 7-Plate Back
Protector $124.95
|
This
7-plate touring design provides a more upright riding stance
and are really popular with serious road riders who want to
ride with protection as well as occasion track day riders.
Carbon/Kev panels with an additional layer of kev provide
great spine protection.
Carbon fibre is extremely
strong and light, Kev is fabric-like and has tremendous
resistance to puncture and tearing, which is why it's used for
ballistic vests, etc. Carbon & Kev together produce an
awesome combination of strength and flexibility providing an
anti-penetration barrier in a very thin cross-section. An
extra layer of Kev is placed underneath the composite, which
is then mounted over the plasticized absorbent rubber foam
carrier. This provides unbeatable protection in a section just
over 1/2" thick!
- Adjustable
shoulder straps
Generous
coverage over shoulder blades
Ventilated
Lining material stays fresh
5.5 inch wide
Carbon/Kev panels
4 inch Elastic
Velcro belt provides support
Broad 21 inch
width & 22.5 inch long provides full coverage to lower
back
- An extra layer
of Kev is placed underneath the composite which is then
mounted over the absorbent rubber based foam
carrier
|
Carbon-Kevlar Race 7-Plate Back
Protector $134.95
|
Carbon
fiber is extremely strong and light, Kevlar is fabric-like and
has tremendous resistance to puncture and tearing, which is
why it's used for ballistic vests, etc. Carbon & Kevlar
together produce an awesome combination of strength and
flexibility providing an anti-penetration barrier in a very
thin cross-section. An extra layer of Kevlar is placed
underneath the composite, which is then mounted over the
plasticized absorbent rubber foam carrier. This provides
unbeatable protection just over 1/2"
thick!
• Adjustable
shoulder straps
• Generous
coverage over shoulder blades
• Ventilated
Lining material stays fresh
• 5.5
inch wide Carbon/Kev panels
• 4
inch Elastic Velcro belt provides support
• Broad
21 inch width provides full coverage to lower back
• Provides
unbeatable protection in a section just over 1/2 inch
thick!
•
An
extra layer of Kev is placed underneath the composite which is
then mounted over the absorbent rubber based foam
carrier
|
Carbon-Kevlar Aerostitch 7-Plate Back
Protector $134.95
|
7-Plate
Touring Design - Following hundreds of requests from safety
minded riders with what's regarded by many as the safest suit,
we now have available a version of the Carbon/Kev Back
Protector to install straight into a 'stitch' suit. It fixes
straight into the Velcro mounting points, and also has the
benefit of some kidney belt support. So you can put on your
protector at the same time as your suit! Easily adaptable to
other riding suits by fixing Velcro in the lining. The
measurements for the Back Protector velcro are (from the
center of the velcro) 24 inches high going from top to bottom
and 12 inches wide going from left to right. The velcro is
wide, and does allow for a little play in attaching the Back
Protector. This Back Protector is recommended for riders 6
foot and taller.
- Adjustable
shoulder straps
Generous
coverage over shoulder blades
Ventilated
Lining material stays fresh
5.5 inch wide
Carbon/Kev panels
4 inch Elastic
Velcro belt provides support
Broad 21 inch
width provides full coverage to lower back
Provides
unbeatable protection in a section just over 1/2 inch
thick!
An extra layer
of Kev is placed underneath the composite which is then
mounted over the absorbent rubber based foam
carrier
- Velcro
attachments are provided in your `Stitch Jacket or Suit.
Check the size on the neck label and select from the
chart. We have designed it so that the average size rider
has a choice of the 6 plate or the longer 7 plate
protectors depending upon type of bike ridden
|
Carbon-Kevlar Race 8-Plate Back
Protector $134.95
 |
This
Race design with tailbone protection, offers the best balance
between comfort and safety. Carbon/Kev panels with an
additional layer of kev provide great spine protection.
Carbon fiber is extremely strong and light, Kevlar is
fabric-like and has tremendous resistance to puncture and
tearing, which is why it's used for ballistic vests, etc.
Carbon & Kevlar together produce an awesome combination of
strength and flexibility providing an anti-penetration barrier
in a very thin cross-section. An extra layer of Kevlar is
placed underneath the composite, which is then mounted over
the plasticized absorbent rubber foam carrier. This provides
unbeatable protection in a section just over 1/2"
thick!
• Adjustable
shoulder straps
• Generous
coverage over shoulder blades
• Ventilated
Lining material stays fresh
• 5.5
inch wide Carbon/Kev panels
• 4
inch Elastic Velcro belt provides support
• Broad
21 inch width provides full coverage to lower back
• Provides
unbeatable protection in a section just over 1/2 inch
thick!
• An
extra layer of Kev is placed underneath the composite which is
then mounted over the absorbent rubber based foam
carrier
•
Extra
tail section on the KC100 Race offers additional lower spine
protection
|
Carbon-Kevlar Race 9-Plate Back
Protector $144.95
|
We
developed this version of our KC series for the growing amount
of tall guys out there both racing and doing track days. It
ensures that at 6ft 3in and up, you can get tailbone
protection! This Race design with tailbone protection, offers
the best balance between comfort and safety. Carbon/Kevlar
panels with an additional layer of kev provide great spine
protection.
Carbon fibre is extremely strong and
light, Kevlar is fabric-like and has tremendous resistance to
puncture and tearing, which is why it's used for ballistic
vests, etc. Carbon & Kevlar together produce an awesome
combination of strength and flexibility providing an
anti-penetration barrier in a very thin cross-section. An
extra layer of Kevlar is placed underneath the composite,
which is then mounted over the absorbent rubber based foam
carrier. This provides unbeatable protection in a section just
over 1/2" thick!
-
Extra-Long
Length for Tall Riders - over 6ft 3in
Adjustable
shoulder straps
Generous
coverage over shoulder blades
Ventilated
Lining material stays fresh
5.5
inch wide Carbon/Kev panels
4
inch Elastic Velcro belt provides support
Broad
21 inch width provides full coverage to lower back
Provides
unbeatable protection in a section just over 1/2 inch
thick!
An
extra layer of Kev is placed underneath the composite which
is then mounted over the absorbent rubber based foam
carrier
- Extra tail
section on the KC100 Race offers additional lower spine
protection
|
ProRacer Cool-Air Back
Protector $194.95
|
Whether
racing or riding on the street we know that a major issue is
Heat. Protection, by definition adds bulk and usually
insulation which makes those hot rides (and races) even
hotter. So our new initiative - Bohn SYSTEMCOOL integrates materials that handle heat efficiently to make
your riding cooler, more comfortable and safer.
This
ProRacer uses an exclusive brand-new hi-tech breathable foam
material, KonformAir. You can pour water through it, and in
fact some racers may soak it before a race! Evaporative
cooling will remove heat from your body as it evaporates. In
addition to a unique color scheme and carbon-leather texture
trim, there is a solid polycarbonate insert which is set under
the spine and shoulder pads. Our Highest Protecting
Coolest Protector!
• Extra Long for those
taller than 6-4
• Large for those taller
than 5-9
• Small for those 5-9
and under
• Adjustable
shoulder straps
• Generous coverage over
shoulder blades
• Ventilated Lining
material stays fresh
• 5.5 inch wide
Carbon/Kev panels
• 4 inch Elastic Velcro
belt provides support
• Broad 21 inch width
provides full coverage to lower back
• Provides unbeatable
protection in a section just over 1/2 inch thick!
• An extra layer of Kev
is placed underneath the composite which is then mounted over
the absorbent rubber based foam carrier
•
Extra tail section on
the KC100 Race offers additional lower spine
protection
|
ProRacer Back Protector $164.95
|
Whether
you're a Racer or a very serious Sportbike rider, check out
the ultimate back protector that's doing 100 mph before you
even get on the bike! Available in Long and Short lengths,
both versions feature Carbon/Kevlar reinforced additional
raised sections in strategic areas - spine, shoulder blades
and kidney/ribs. Still maintaining the famous flexibility and
comfort with important tailbone protection, your ProRacer can
be worn all day without you knowing it's
there.
- Also available
in long XL and short lengths New raised protection pads to
spine and tailbone areas
New raised
protection pads to shoulder blades
New raised &
extended kidney protection pads
Leather trim
with adjustable shoulder straps and velcro waist
band
Long Version for
those taller than 5-9
Short Version
for those shorter than 5-8
Hand Made in the
U.S.A
- Tailbone
Protection: Highsiding happens suddenly and catapults the
rider up in the air. Often he lands in the same sitting
position on the tarmac! The Proracer tailbone protection
helps cushion this impact. Additional length is needed to
wrap around the butt for when you are in the riding
position. As the backing material is flexible you do not
notice it.
|
ProRacer Cool-Air Back Protector Extra Large
Riders over 6'4" $219.95
|
Whether
racing or riding on the street we know that a major issue is
Heat. Protection, by definition adds bulk and usually
insulation which makes those hot rides (and races) even
hotter. So our new initiative - Bohn SYSTEMCOOL integrates materials that handle heat efficiently to make
your riding cooler, more comfortable and safer.
This
ProRacer uses an exclusive brand-new hi-tech breathable foam
material, KonformAir. You can pour water through it, and in
fact some racers may soak it before a race! Evaporative
cooling will remove heat from your body as it evaporates. In
addition to a unique color scheme and carbon-leather texture
trim, there is a solid polycarbonate insert which is set under
the spine and shoulder pads. Our Highest Protecting
Coolest Protector! Also available in long XL and short
lengths New raised protection pads to spine and tailbone
areas
- New raised
protection pads to shoulder blades
New raised &
extended kidney protection pads
Leather trim
with adjustable shoulder straps and velcro waist
band
Long Version for
those taller than 5-9
Short Version
for those shorter than 5-8
Hand Made in the
U.S.A
- Tailbone
Protection: Highsiding happens suddenly and catapults the
rider up in the air. Often he lands in the same sitting
position on the tarmac! The Proracer tailbone protection
helps cushion this impact. Additional length is needed to
wrap around the butt for when you are in the riding
position. As the backing material is flexible you do not
notice it
|
Pro Racer Carbon Extra Long Back
Protector $164.95
|
We
developed this version of our ProRacer for the growing amount
of tall guys out there both racing and doing track days. It
ensures that at 6ft 3in and up, you can get tailbone
protection! Available in Carbon Black.
Also
available in a XL version in the CarbonKevlar series (item
KC19)
- New raised
protection pads to spine and tailbone
areas
New raised
protection pads to shoulder blades
New raised &
extended kidney protection pads
Leather trim
with adjustable shoulder straps and velcro waist
band
Hand Made in the
U.S.A
- Tailbone
Protection: Highsiding happens suddenly and catapults the
rider up in the air. Often he lands in the same sitting
position on the tarmac! The Proracer tailbone protection
helps cushion this impact. Additional length is needed to
wrap around the butt for when you are in the riding
position. As the backing material is flexible you do not
notice it.
|
Motard $129.95
|
Supermoto
is currently the place to be for hot motorcycle action, and is
showing that champions win whatever the surface - whether it
is pavement or dirt.
But
M-Xers are finding that crashing on tarmac is often more
painful than a spill on the dirt, and this has stimulated
interest in protection solutions for off road riders.
Construction.
Similar to the ProRacers, but without the tailbone extension,
for more comfort when in an upright riding position. Raised,
double thickness panels down the spine and over shoulder
blades supplement the coverage provided to the whole of your
back - not just your spine! Color matched leather on the
raised panels completes the picture of a great, smart choice
for off-road riding.
Touring
Riders
These
are also an excellent choice for street riders on Touring
Bikes who want maximum protection but find the tailbone
protection on our Sportbike models
undesirable.
- Ideal for all
offroad riding and racing
Cool and
comfortable to wear
Protects all
your back
Extra coverage
over spine and shoulder
No sacrificial
components - you can crash often!
As used by
TwoBros Super-Moto Team Dustin Nelson and Andy
Harrington
- Hand Crafted in
the
USA
|
ProRacer Chest Protector $44.95
|
Comfortable
to wear with the same top quality as the ProRacer Back
Protector. Great for street riders, and the serious track
enthusiast. 17 inch W X 11 inch H, 3/4 inch thick. Buy it in
combination with our ProRacer back protector and save
money.
- Covers and
protects vital organs
Puncture
resistant center piece
Easy on and off
design
Adjustable belt
for all chest sizes
Built to Bohn
armor standards
Can be worn with
any back protector or separately
- Also available
in a white Cool-Air version.
|
